Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Arlington?
Chimney liner installation in Arlington typically costs $2,400 to $5,800, and a partial chimney rebuild usually falls between $3,200 and $9,500 depending on how much brickwork has to come down and go back up. A relining job on a sound chimney with a straightforward flue sits at the lower end, while a full-height rebuild on an older Arlington home pushes toward the top. Every job is priced individually, and the written estimate you receive sets the final number.
We’re Thrive Chimney Sweep, and chimney and venting work is all we do. When we walk a house, we’re looking at two things: whether the flue can be relined, and whether the masonry around it can be saved or has to be rebuilt. Those are different jobs with different costs, and the price you pay depends on which one your chimney actually needs.
Our technicians have up to 12 years of experience, and we install professional-trade materials from DuraFlex and HeatShield rather than hardware-store substitutes. If you want a straight answer on your own chimney, call (866) 942-6157. We answer 24/7, and estimates are free.
Key Takeaways
- Full stainless liner installation in Arlington: $2,400 to $5,800 typical.
- HeatShield flue resurfacing (when the flue is sound enough to reline): $1,600 to $3,400.
- Partial chimney rebuild: $3,200 to $9,500. Full rebuild runs higher and is quoted per job.
- Unlined flues and flues damaged by a past chimney fire are the two biggest cost drivers.
- Free estimates, upfront pricing, and a written scope before any work starts.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what the main line items typically run in Arlington this year. Use these as a planning range, not a quote. Your chimney’s height, flue size, and condition move the number.
| Line Item | Typical Range (Arlington, 2026) |
|---|---|
| Stainless steel liner, single-flue installation (DuraFlex) | $2,400 – $5,800 |
| HeatShield flue resurfacing | $1,600 – $3,400 |
| Liner for a second flue or a large fireplace | $1,900 – $3,600 |
| Top plate, cap, and crown repair | $350 – $1,200 |
| Partial chimney rebuild (upper section, above roofline) | $3,200 – $7,500 |
| Full chimney rebuild (ground to crown) | $9,500 – $22,000 (quoted per job) |
| Firebox and damper repair | $600 – $2,400 |
| Chimney sweep and inspection before the work | $150 – $400 |
Liner installation is the most common job we quote, and it’s usually the cheaper fix. A rebuild only enters the picture when the brick itself has failed – spalling faces, crumbling mortar joints, a leaning stack, or a crown that’s let water in for years. We’d rather reline a sound chimney than tear one down, and we tell homeowners plainly which one they need.
What pushes a job toward the high end? Height, for one. A tall stack means more liner material and more labor at the top. Flue size matters too – a large fireplace opening needs a bigger liner. And if the chimney has never had a liner at all (common in older Arlington homes built before liners were standard), the whole flue has to be fitted from scratch, and that’s more work than replacing an existing liner.
What Affects Chimney Liner & Rebuild Pricing in Arlington
No two chimneys in Arlington price out the same way. These are the factors that move the number most.
- Whether there’s a liner at all. A chimney that was built unlined needs a full liner installation, which is more involved than replacing a worn one. Many older homes around Arlington were built before liners were standard practice, so we find unlined flues more often than homeowners expect.
- Flue condition and past fires. A flue that’s had a chimney fire can be cracked or glazed, and that changes the fix. Sometimes HeatShield resurfacing restores the flue; sometimes the damage is deep enough that a full stainless liner is the only safe option.
- Chimney height and roof access. A single-story ranch in Arlington is easier and cheaper to work on than a two-story stack with a steep roof pitch. Height adds liner material and time on the ladder, and both show up on the estimate.
- Masonry damage from North Texas weather. Arlington sits in a part of North Texas where summers are long and hot and the occasional hard freeze does hit. That swing works on brick and mortar over time, and a chimney that’s been through enough of it may need rebuild work rather than a liner alone.
- Number of flues. A chimney serving both a fireplace and a furnace or water heater has two flues. Two liners cost more than one, and each has to be sized and fitted separately.
- Cap, crown, and flashing. These are the parts that keep water out. If the crown is cracked or the flashing has pulled away, we include that repair in the scope, because a new liner under a leaking crown is money wasted.
The point of the inspection is to sort all of that out before anyone quotes a number. We look at the flue with a camera, check the masonry, and check the crown and flashing. Then we tell you what we found and what it means, without the scare tactics. That’s how the estimate gets built.
Do You Need a Liner or a Rebuild?
Most Arlington homeowners who call about a liner actually need a liner. A rebuild is the less common answer, and it’s driven by structural failure rather than by how the flue looks inside. Here’s how we separate them.
You likely need a liner if: the chimney has no liner, the existing liner is cracked or deteriorated, the flue has glazed from a fire, or you’re upgrading an appliance and the flue has to be resized. A liner is a structural fix when it’s done right – it seals the flue and gives smoke and heat a safe path up and out. That’s the job our DuraFlex liner installation handles, and it’s a fix, not a band-aid.
You likely need a rebuild if: the brick faces are spalling and flaking off, mortar joints are crumbling through the stack, the chimney is leaning away from the house, or the crown has failed badly enough that water has gotten into the masonry. Rebuilding means taking down the damaged section and laying new brick from a sound base up.
There’s a middle case worth knowing about. Sometimes the masonry is sound but the flue’s inner surface is rough or has gaps. That’s where HeatShield comes in. HeatShield is a resurfacing material that restores the flue’s interior without a full liner, and it’s a repair tier most sweep-only companies can’t offer. We carry it because it lets us fix a flue that would otherwise get pushed toward a more expensive option.
We work with recognized professional-trade brands across both jobs – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because a liner or a rebuild is only as good as the materials in it.
How to Save on Chimney Liner & Rebuild
We’re not going to pretend there’s a cheap way to do structural chimney work. There isn’t. But there are real ways to keep the number from climbing, and most of them come down to timing.
- Get the inspection before the problem grows. A flue issue caught early is a relining job. The same issue left alone for a few rainy seasons can turn into a rebuild once water gets into the masonry. The inspection is the cheapest part of the whole process.
- Fix the crown and flashing now. Crown and flashing repairs run a few hundred dollars and protect the far bigger investment in the liner and the brick. Skipping them is how a small leak becomes a rebuild.
- Ask for the written scope. A clear estimate that lists what’s included – liner, cap, crown repair, sweep – keeps the price honest and stops add-ons from appearing mid-job. We quote per job and the written estimate sets the final price.
- Don’t shop on price alone. A liner is a safety component. A bid that’s far below the rest usually means a thinner liner, a skipped crown repair, or no resurfacing step. Ask what brand and what thickness you’re getting before you compare numbers.
- Bundle the sweep with the work. If the chimney is due for a sweep and an inspection, having it done as part of the same visit keeps the total down.
Estimates are free, and we’ll tell you what we find and what it costs to fix. Call (866) 942-6157 to set one up. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Does Homeowners Insurance Cover a Chimney Liner or Rebuild?
Sometimes, depending on what caused the damage. Insurance may help with a rebuild if the damage came from a covered event, such as a chimney fire or a storm that took out part of the stack. Normal wear, age, and years of slow water intrusion are usually not covered, and that’s the cause behind most rebuilds we see in Arlington.
We can work with your insurer on documentation, but the coverage decision is yours and your adjuster’s. We tell you what we found and what it will take to fix it, and we put that in writing so you have something to hand your insurer. If you’re not sure whether your situation qualifies, call (866) 942-6157 and we’ll walk through what the inspection showed.
Can You Fix a Chimney Liner the Same Day?
A liner installation isn’t a same-day job in most cases. Liner work typically takes a full day or more depending on height, flue count, and whether resurfacing is part of the scope. What we can usually do same day is the inspection and the written estimate, so you know what you’re dealing with before you commit.
If the flue has failed or the chimney is unsafe to use, don’t burn in it until the work is done. Call (866) 942-6157 and we’ll get the inspection on the schedule. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Arlington?
A chimney liner installation in Arlington typically runs $2,400 to $5,800, with most single-flue jobs landing in the middle of that range. Height, flue size, and whether the chimney was ever lined move the number. Call (866) 942-6157 for an exact quote – estimates are free.
Is it cheaper to repair a chimney or rebuild it?
Repair is almost always cheaper. HeatShield resurfacing at $1,600 to $3,400 or a full liner at $2,400 to $5,800 costs far less than a partial rebuild at $3,200 to $9,500. A rebuild only makes sense when the masonry itself has failed, so the inspection decides it. Call (866) 942-6157 and we’ll tell you which one your chimney needs.
How much does a chimney rebuild cost in Arlington?
A partial chimney rebuild in Arlington typically runs $3,200 to $7,500, and a full rebuild from the ground to the crown runs $9,500 to $22,000, quoted per job. How much brick has to come down, and how high the stack is, drive the price. Call (866) 942-6157 for a free written estimate.
Do I really need a chimney liner?
Yes, if the flue is unlined, cracked, or damaged. An unlined or damaged flue lets heat and combustion gases into the surrounding structure, which is a fire and health hazard. A liner is a safety requirement, not an upgrade. Call (866) 942-6157 and we’ll inspect the flue and tell you exactly where yours stands.
Can you come today?
Same-day inspections are often possible. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 942-6157 and we’ll get you on the schedule.
Why Thrive for Chimney Liner & Rebuild in Arlington
Chimney work is the only thing we do, and that focus is why we can handle a job end to end. One call covers the sweep, the inspection, the liner, the resurfacing, and the structural repair. You’re not coordinating a sweep company and a mason and hoping they agree on scope. We also clean dryer vents to NFPA fire-safety standards, which matters because a clogged dryer vent is one of the leading causes of house fires and most chimney companies don’t touch it.
We stock and install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the materials specified by certified chimney engineers, not the box-store versions. Being HeatShield-capable means we can resurface a flue a sweep-only company would have to walk away from. And we don’t upsell. We inspect, we explain what we found and what it means, and we give you a written estimate with the price on it.
We serve homeowners across Arlington, and our technicians have up to 12 years of experience with liners, rebuilds, and everything in between. Call (866) 942-6157 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Thrive Chimney Sweep offers free estimates – call (866) 942-6157.
Written by the team at Thrive Chimney Sweep.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Gilbert Vargas"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Kristen Miller"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Oscar Morales