Chimney Company in Arlington - One Flat Price, You See What We See

Chimney Company in Arlington, TX

Chimney repair in Arlington usually starts with a surprise. A homeowner lights the first fire of the season and smoke rolls into the living room, or a roofer mentions the chimney crown looks rough. In a city full of 1960s – 1980s ranch homes, the flue behind that fireplace was often never lined to modern standards, so what looks like a simple cleaning turns into a closer look at the whole chimney. We handle chimney repair, sweeping, and dryer vent work with professional-grade materials, and we show you what we find before recommending anything. Call (866) 942-6157 to book an estimate.

Call (866) 942-6157

Why Arlington Homes Are Different

Arlington’s housing stock tells the story. The city grew fast after the war, and a large share of its single-story brick ranches and traditional homes date from the 1960s through the 1990s. Many still have the original masonry fireplace and clay-tile flue they were built with. In the older neighborhoods between Cooper Street and Fielder Road, it’s common to find chimneys with original 1960s clay flue tiles that have shifted or cracked, and caps packed with pecan leaves. A sweep there almost always starts with a flashlight inspection from the roof.

The climate adds its own wrinkles. North Texas winters are mild enough that fireplaces sit idle for months, which gives creosote time to harden and gives birds and squirrels time to nest. Then a cold snap arrives and the fireplace gets a heavy first-use load all at once. Spring and fall storms plus summer heat crack masonry crowns and let water into the chimney, so a cleaning visit often doubles as a water-damage inspection. Newer subdivisions on the far north and far south sides bring factory-built metal fireplaces with their own service needs.

Our Main Arlington Services

Most Arlington homeowners call us about one of two things: a chimney that needs cleaning or repair, or a dryer that takes too long to dry a load.

Chimney Sweep in Arlington

A sweep here is rarely just a sweep. We start on the roof with a flashlight, checking the cap, the crown, and the visible flue tiles before any brushing begins, because Arlington’s mature pecan and oak canopy drops twigs and leaves that clog caps and invite nesting. Inside, we run the brushes and a camera to see what the flue actually looks like. If we find cracks, gaps, or heavy glazed creosote, you’ll see the photos and hear the options. For a closer look at what that visit includes, see Chimney Sweep in Arlington.

Dryer Vent Cleaning in Arlington

Lint packed into a dryer duct is one of the leading causes of house fires, and it’s a venting problem most chimney companies don’t touch. We clean dryer vents to NFPA fire-safety standards, pulling the lint that builds up in the run between the dryer and the outside wall. In older Arlington homes, that run is sometimes long or made of the flexible foil duct that sags and traps lint. If your dryer takes two cycles to finish a load or the outside flap doesn’t open, it’s worth a look. Details are on Dryer Vent Cleaning in Arlington.

Chimney Repair in Arlington

Chimney repair in Arlington often comes down to age and weather working on the same chimney at once. Homes built in the 1960s and 1970s still carry their original clay flue tiles, and decades of North Texas heat, storm-driven rain, and long idle summers have left many of those tiles cracked or shifted. Add a masonry crown that’s spalling from repeated wet-and-dry cycles and you have a chimney that lets water and smoke go where they shouldn’t. That’s the work we do most here: evaluating an aging flue honestly, then fixing it with Chimney Repair materials built for the job rather than patching over the problem.

Chimney Cap Installation

Signs you need it

You need a cap if the flue is open to the sky, if you’ve found leaves, twigs, or bird nests in the firebox, or if rain runs down the flue during storms.

What it costs in Arlington

Chimney cap installation in Arlington typically runs $150 – $400, depending on the flue size and the cap style, with the written estimate setting the final price.

How we do it

We measure the flue opening, set a stainless cap sized to fit with a mesh screen that keeps animals and debris out while letting smoke escape, and fasten it to the crown.

Chimney Cap Replacement

Signs you need it

An existing cap needs replacing when it’s rusted through, bent, missing its screen, or sitting loose enough that wind moves it.

What it costs in Arlington

Replacing a chimney cap in Arlington is typically $150 – $400, and the written estimate sets the final price once we’ve seen the flue and the old cap.

How we do it

We remove the old cap, check the crown and flue top for damage the cap may have been hiding, then install a correctly sized replacement and secure it against wind.

Chimney Liner Installation

Signs you need it

You need a liner if the flue has cracked or shifted clay tiles, has no liner at all, or shows gaps that let heat reach the surrounding wood framing.

What it costs in Arlington

Chimney liner installation in Arlington typically falls between $1,800 and $4,500 for a DuraFlex stainless liner, sized to the flue and appliance, with the written estimate setting the final price.

How we do it

We measure and camera the flue, insulate and pull a correctly sized DuraFlex liner down from the top, connect it to the appliance collar, and top it off at the crown.

What Chimney Repair Costs in Arlington

Do I really need a new chimney liner in Arlington?

Only if the camera shows cracked or missing tiles, gaps, or an unlined flue. We show you the footage and photos before recommending a liner, and we’ll tell you plainly when a repair can safely wait. Call (866) 942-6157 for a free estimate.

Can chimney repair wait until next season in Arlington?

Sometimes it can. A worn cap or a small crown crack can usually wait a few months if no water is getting in. A cracked liner or heavy creosote can’t. We tell you which one you have before you spend anything. Call (866) 942-6157 for a free estimate.

Brands We Service in Arlington

Our repair and installation work uses professional-trade brands: DuraFlex liners for compromised flues, HeatShield for resurfacing, and Copperfield and Gelco components where they fit the job. These are the materials specified by chimney engineers, not hardware-store substitutes. Turnaround depends on the material, and we confirm timing in the written estimate. See our brands for the full list.

Pricing for Chimney Company in Arlington, TX

Neighborhoods We Serve in Arlington

We work across Arlington, from the older ranch neighborhoods near downtown and the Cooper Street corridor out to the newer subdivisions on the north and south edges of the city. The housing differs block to block, so the work does too: a 1965 brick ranch with original clay tiles needs a different visit than a 2015 build with a factory-made fireplace. When you call, we ask what kind of fireplace you have and what you’ve noticed, which helps us book the right amount of time. Most Arlington calls get a booking within a few days.

• Central Arlington near downtown and Cooper Street
• The Fielder Road corridor
• North Arlington subdivisions
• South Arlington and the Mansfield border
• Pantego-adjacent neighborhoods

Service Area – Cities Near Arlington

Arlington sits in the middle of the Metroplex, and we cover the smaller cities that border it. If you’re just outside the Arlington line in Pantego, TX, we can help. The same goes for homeowners in Richland Hills, TX to the northwest, Kennedale, TX to the south, and Forest Hill, TX to the west. The housing stock in these towns is similar to Arlington’s older neighborhoods, so the same aging-flue issues come up. Call and we’ll confirm coverage and book a time.

FAQs About Chimney Company in Arlington

Contact Us

Whether your chimney needs a sweep, a liner, a new cap, or a dryer vent cleaned, the next step is the same: call (866) 942-6157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We look at the chimney, show you what we find, and quote the job in writing before anything starts, and we’ll tell you when a repair can wait.