Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Arlington?
Fireplace services in Arlington typically cost $150 to $300 for a standard chimney sweep and inspection, $250 to $700 for a fireplace tune-up with minor repair, and $1,200 to $3,800 for a flue liner installation or resurfacing. Most homeowners in Arlington pay somewhere in the $220 to $350 range for routine cleaning and inspection on a wood-burning fireplace. The written estimate you get before any work begins sets the final price.
Fireplace Services Cost Breakdown (2026)
Here’s what the main fireplace services run in Arlington, with typical price ranges by job type. These are estimates for the Arlington market in 2026, and the written estimate you receive sets the final price.
| Service | Typical Arlington Price Range | What It Covers |
|---|---|---|
| Chimney sweep and level-one inspection | $150 – $300 | Soot and creosote removal, visual check of the firebox, damper, and flue |
| Level-two inspection (camera scan) | $250 – $450 | Video inspection of the full flue, used after a chimney fire or before a liner install |
| Fireplace tune-up with minor repair | $250 – $700 | Sweep plus damper adjustment, firebox caulking, screen or door hardware |
| Crown repair and re-caulking | $350 – $850 | Sealing a cracked or deteriorating crown to stop water intrusion |
| Flue resurfacing (HeatShield) | $1,200 – $2,400 | Resurfacing a cracked clay flue to restore a smooth liner surface |
| DuraFlex stainless liner installation | $1,800 – $3,800 | Relining a compromised, unlined, or misaligned flue |
| Dryer vent cleaning | $100 – $200 | Full lint removal and airflow check on the dryer vent run |
What drives the price up or down? Flue size and height matter first. A tall two-story chimney with an offset flue takes more labor than a short one. The condition of the flue matters next: a flue that’s already cracked, out of round, or unlined needs resurfacing or a full liner, and that’s a structural repair rather than a cleaning. Material choice moves the number too; a DuraFlex stainless liner is a bigger investment than resurfacing a manageable crack with HeatShield, but each addresses a different problem. Access at the roofline, whether the fireplace is wood-burning or gas, and how much creosote has built up all affect the estimate.
We work with professional-trade materials only: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the same brands specified for certified chimney work, not the hardware-store substitutions that fail faster in a hot flue.
What Affects Fireplace Services Pricing in Arlington
Pricing in Arlington isn’t one-size-fits-all. These are the factors that move the number, and they’re the same factors that decide whether you need a cleaning or a repair.
- Flue condition and creosote level. A light soot buildup needs a routine sweep. Glazed, hard creosote in a heavily used fireplace takes more time and care to remove safely, and a level-three situation (a flue packed with buildup) can shift the job from cleaning into repair.
- Fireplace type. A wood-burning firebox, a gas insert, and a factory-built unit each have different service needs and parts. Gas units may need a log set and burner inspection; wood units carry more creosote and soot.
- Flue size, height, and access. Tall chimneys and flues with offsets take more time. Roof pitch and how easily the technician can reach the crown both factor into the estimate.
- Material and repair tier. A resurfaced clay flue with HeatShield and a full DuraFlex liner are different price points because they solve different problems. A cracked flue that’s still structurally sound may only need resurfacing; a failed or unlined flue needs a liner.
- Whether you combine services. Having the chimney swept and the dryer vent cleaned on the same visit is usually more economical than booking them separately, and it’s one call instead of two.
- Arlington’s climate and home age. North Texas summers are long and hard on masonry, and many Arlington homes are old enough to have clay flues that have developed hairline cracks over the years. Mild winters mean the fireplace gets used, but the heat and humidity are what tend to age the mortar and crown.
How to Save on Fireplace Services
Fireplace work is priced per job, and the written estimate sets the final number, so the best way to control cost is to understand the job before it starts. A few practical moves:
- Get the inspection before the repair. A $150 – $300 sweep and inspection tells you whether you need a cleaning or a structural fix. Skipping straight to a big repair can cost more than the diagnosis would have.
- Combine visits. Book chimney sweeping and dryer vent cleaning together. Dryer vents are a leading household fire cause, and most chimney companies ignore them entirely; handling both in one visit saves you a second trip.
- Address small cracks early. A cracked crown or a hairline flue crack caught at the sweep stage may only need resurfacing rather than a full liner. Waiting lets water and heat make the repair bigger.
- Ask for upfront pricing in writing. A free estimate means you know the number before anyone starts. Call (866) 942-6157 for a free estimate.
- Match the material to the problem. Not every flue needs the top-tier liner. Ask what the specific failure is and whether resurfacing or a liner is the right fix for it.
Is It Cheaper to Repair or Replace a Chimney Flue in Arlington?
Repair is usually cheaper than a full liner replacement, but only when the flue structure is still sound. Resurfacing a cracked clay flue with HeatShield typically runs $1,200 to $2,400, while a full DuraFlex stainless liner installation runs $1,800 to $3,800. If the flue is unlined, badly misaligned, or has failed entirely, a liner is the structural fix that resurfacing can’t provide. A level-two camera inspection is what tells you which category you’re in. Call (866) 942-6157 for a free estimate; estimates are free and upfront.
Can You Clean a Fireplace and Dryer Vent on the Same Visit?
Yes. Chimney sweeping and dryer vent cleaning can be done in one appointment by the same trained technician. A combined visit typically runs $250 to $500 depending on the number of flues and the length of the dryer vent run. Combining the two saves you coordinating a separate contractor and often trims the total. We treat dryer vent cleaning as part of whole-home venting safety, because lint buildup is one of the leading causes of household fires and most chimney-only companies skip it.
Frequently Asked Questions
How much does a chimney sweep cost in Arlington?
A standard chimney sweep in Arlington costs about $150 to $300, including a level-one visual inspection. Add a camera scan (level-two) and the range moves to $250 to $450. The written estimate sets the final price. Call (866) 942-6157 for an exact quote; estimates are free.
Is it cheaper to repair or replace a fireplace flue?
Repair is cheaper when the flue is structurally sound: resurfacing runs $1,200 to $2,400 versus $1,800 to $3,800 for a full liner. A level-two inspection tells you which you need. Call (866) 942-6157 to schedule one.
How much does flue resurfacing with HeatShield cost in Arlington?
HeatShield flue resurfacing typically runs $1,200 to $2,400 in Arlington, depending on flue size and how much of the run needs resurfacing. It restores a cracked clay flue without a full liner when the structure is still intact. Call (866) 942-6157 for a free estimate.
How much does dryer vent cleaning cost in Arlington?
Dryer vent cleaning runs about $100 to $200, or less when bundled with a chimney sweep on the same visit. Lint buildup is a real fire risk, so it’s worth handling alongside the chimney. Call (866) 942-6157 for a free estimate.
Can you come today?
Same-day service is often available depending on the schedule. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (866) 942-6157 for a free estimate and to check today’s availability.
Why Homeowners in Arlington Call Thrive
Fireplace work isn’t something to hand to a generalist. We work exclusively on chimneys and venting, which means the same trained technician can sweep your flue, resurface a crack with HeatShield, install a DuraFlex liner, and clean your dryer vent in one visit. That’s one call instead of coordinating several contractors. Our technicians have up to 12 years of experience, and our materials come from professional-trade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We tell you what we find and what it means, without scare tactics or vague recommendations.
Contact Thrive Chimney Sweep
Whether you need a routine sweep, a flue resurfaced, a liner installed, or your dryer vent cleaned, we’ll give you a clear, upfront estimate before any work starts. Call (866) 942-6157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Thrive Chimney Sweep.
Pricing reflects the Arlington market as of 2026. Thrive Chimney Sweep offers free estimates – call (866) 942-6157.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Riya Reddy"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Gilbert Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Oscar Morales