Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Arlington?
Chimney repair in Arlington typically costs $285 to $1,850, with most common repairs landing between $400 and $900. A crown rebuild or a small masonry patch sits at the low end, while a full stainless liner installation runs $1,800 to $5,500. Structural work on an older brick chimney is the job most likely to push a bill past $1,000, and the written estimate you get before work starts is what sets the actual price.
We’re Thrive Chimney Sweep, and chimney and venting work is all we do. Our technicians have up to 12 years of experience, and we carry professional-grade materials from brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. One call covers your chimney sweep, any needed repairs, and dryer vent cleaning. Call (866) 942-6157 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Arlington chimney repairs fall between $400 and $900.
- Liner installation is the biggest single line item, typically $1,800 to $5,500.
- Crown and flashing repairs cost less but stop the water damage that drives bigger bills.
- HeatShield flue resurfacing costs less than full liner replacement and handles many cracked flues.
- Estimates are free, and the written estimate sets the final price.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Arlington market this year. These are typical ranges. Every chimney is different, and the price moves with height, access, and how much of the flue is damaged.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney sweep and inspection | $150 – $350 | Cleaning the flue and a full visual inspection of the firebox, damper, crown and flashing |
| Crown repair (small) | $285 – $600 | Patching cracks in the concrete crown so water stops running behind the brick |
| Crown rebuild (full) | $600 – $1,200 | Removing a failed crown and pouring a new one with a proper overhang and bond break |
| Tuckpointing and masonry repair | $400 – $1,500 | Grinding out crumbling mortar and repacking joints in the brick stack |
| Flashing repair | $300 – $750 | Resealing or replacing the metal where the chimney meets the roof |
| Damper repair or replacement | $250 – $650 | Fixing a stuck or warped damper or installing a new top-sealing damper |
| Firebox repair | $500 – $1,800 | Rebuilding cracked firebrick or resurfacing the firebox with a refractory material |
| HeatShield flue resurfacing | $1,200 – $2,800 | Resurfacing a cracked or pitted clay flue liner to restore a smooth, sealed flue |
| Stainless liner installation | $1,800 – $5,500 | Installing a new DuraFlex stainless liner in an unlined, damaged or oversized flue |
| Chimney cap installation | $200 – $550 | Fitting a cap to keep water, birds and debris out of the flue |
What pushes a job toward the top of its range? Height and access top the list. A chimney that’s easy to reach from the roof gets done faster than one that needs staging or a steep-pitch setup. The extent of the damage matters just as much: a hairline crack in the crown is a patch, but a crown that’s separated from the stack and letting water track down the brick is a rebuild. Liner decisions swing cost the most. Resurfacing a flue with HeatShield is a meaningful repair at a fraction of a full liner, but if the flue is unlined or the clay tiles are collapsed, a new DuraFlex liner is the structural fix.
Firebox and damper work adds up when the internals are neglected. Cracked firebrick lets heat reach the masonry behind it, and a warped damper means you’re losing heat up the flue every time the fireplace is cold. Both are worth catching during a sweep instead of after a problem shows up.
What Affects Chimney Repair Pricing in Arlington
- Chimney height and roofline. Single-story ranch homes around Arlington are straightforward to work on. A tall, steep-roofed chimney takes more setup and more time, and the labor line reflects that.
- Whether the flue is lined. A clay-lined flue that’s cracked can often be resurfaced with HeatShield. An unlined or collapsed flue needs a full stainless liner, which is the single largest repair in this trade.
- How much water damage the crown and flashing have let in. Arlington’s rain comes in short, heavy bursts, and a failed crown or flashing lets water soak into the brick and freeze once or twice most winters. Spalling brick and crumbling mortar cost more to fix than a crown patch would have.
- Brick and mortar condition on older homes. A lot of Arlington’s older housing stock has brick chimneys that need tuckpointing. The more joints that have gone soft, the longer the job.
- Firebox and damper condition. The parts you actually see burning get the most heat. Cracked firebrick and a failed damper are common add-ons once the chimney is opened up.
- Material choice. Professional-trade liners and components (DuraFlex, Olympia Chimney) cost more than hardware-store substitutes and last longer. We won’t quote a repair with parts we wouldn’t put in our own homes.
How to Save on Chimney Repair
The cheapest repair is the one you catch early. A yearly sweep and inspection is the lowest-cost line item on this page, and it’s the visit that finds a cracked crown before it becomes a rebuild or spots a failing liner before water gets into the flue. For a lot of Arlington homeowners, that routine visit pays for itself in the repairs it prevents.
A few practical ways to keep the bill down:
- Book the sweep before the burn season. A schedule that isn’t jammed means more time to plan a repair rather than react to one. Call (866) 942-6157 to get on the calendar.
- Ask whether HeatShield will work before you agree to a full liner. If the flue is cracked but structurally sound, resurfacing can save a substantial amount over replacement, and we’ll tell you honestly which one your chimney needs.
- Fix the crown and flashing together. Both stop water at the top of the chimney. Doing them in the same visit is cheaper than two separate trips.
- Bundle in the dryer vent. Dryer vent cleaning is part of our whole-home venting work and is a leading household fire cause most chimney companies ignore. One visit covers both.
- Get the free estimate in writing. The written estimate sets the final price. We tell you exactly what we find and what it means, with no scare tactics, no vague recommendations and no surprise add-ons.
One caution on cost-cutting: chimney work involves height, heat, and the flue that carries combustion gases out of your home. Liner work, firebox repair, and anything above the roofline is genuinely dangerous to handle without training, so leave those to a professional. A cheap patch on a flue that’s actually failing isn’t a saving. It’s a fire or carbon monoxide risk you’re postponing.
Is It Cheaper to Repair or Replace a Chimney Liner in Arlington?
Repair is almost always cheaper, when repair is possible. HeatShield resurfacing runs roughly $1,200 to $2,800, while a full DuraFlex liner installation runs $1,800 to $5,500. The deciding question isn’t price, it’s the condition of the flue. If the clay tiles are cracked or pitted but intact, resurfacing restores a smooth, sealed flue and saves money. If the chimney has no liner at all, or the tile is collapsed or separated from the masonry, a new stainless liner is the only safe fix. Call (866) 942-6157 for a free inspection and estimate.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Arlington?
Most Arlington chimney repairs cost between $400 and $900, though the total ranges from about $285 for a small crown patch to $5,500 for a full stainless liner installation. The written estimate sets the final price. Call (866) 942-6157 for a free, no-pressure quote.
How much does chimney repair cost in Arlington vs. a full rebuild?
A targeted repair is far cheaper than a rebuild. Crown, flashing, tuckpointing and liner work typically top out around $5,500, while a full chimney rebuild can run several times that. Most chimneys that are structurally sound don’t need anything close to a rebuild. Call (866) 942-6157 and we’ll tell you honestly which category yours is in.
Can you come today?
Same-day service is often possible, and estimates are free. Call (866) 942-6157 to check on availability. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How much does a chimney sweep and inspection cost in Arlington?
A chimney sweep and inspection in Arlington typically costs $150 to $350 and is the best money you’ll spend on your chimney. It’s the visit that catches a cracked crown, a failing damper or a liner problem before it turns into an expensive repair. Call (866) 942-6157 to book a free estimate.
Is it cheaper to repair or replace a chimney crown?
Repairing a crown usually costs $285 to $600, and a full rebuild runs $600 to $1,200, so a patch is cheaper when the damage is limited. Once the crown has separated from the stack or is letting water in, a rebuild is the only repair that actually fixes it. Call (866) 942-6157 for a free look and a written estimate.
Ready to get a real number? Chimney and venting work is all we do, so you get a specialist on the job instead of a generalist. Whether you need a routine sweep, a HeatShield resurfacing, a new DuraFlex liner or full structural repair, one call covers it. Our technicians have up to 12 years of experience, and we use professional-trade materials from brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. We tell you exactly what we find and what it means, and the written estimate sets the price. Call (866) 942-6157 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Thrive Chimney Sweep offers free estimates – call (866) 942-6157.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Gilbert Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Oscar Morales"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Emily Walsh